Siemens HiPath 4000 Скачать руководство пользователя страница 3

Страница: 3 / 135

Safety notes

III

Battery pack

• Only use approved Ex battery packs (see the "Permitted battery

packs" section in the operating manual). Ex authorisation is only

valid and the handset can only be used in conjunction with this

battery pack. Other battery packs are strictly prohibited. If they

are used, Ex protection is no longer valid.

• Never open the handset battery compartment in an Ex zone.

Battery pack removal, charging or transportation is not permitted

in these zones.

Charging the battery pack

• The battery pack may only be charged:

– outside the Ex zone
– while inside the handset
– using the supplied charging unit.

• The charging unit should only be used outside the Ex zone.

Headset:

• A corded headset may not be used in the Ex area. Only Ex au-

thorised Bluetooth headsets may be used. For more informa-

tion, consult your system administrator.

Содержание HiPath 4000








































































































































Результаты поиска

Содержание HiPath 4000

Отзывы:

Похожие инструкции для HiPath 4000

Бренды по названию

Популярные бренды

Siemens HiPath 4000, Руководство по эксплуатации

Результаты поиска

Содержание HiPath 4000

Отзывы:

Похожие инструкции для HiPath 4000

Бренды по названию

Популярные бренды