Siemens HiPath 4000 Скачать руководство пользователя страница 44

Страница: 44 / 135

Step by Step

Setting the handset

Colour scheme

Four colour schemes are saved on your handset. By se-

lecting a colour scheme you define the colours to be

used for the font, menu items and background.

If you change to a different colour scheme during a set-

ting, it is immediately previewed to show how it will ap-

pear later for all menus.

Open the main menu of the handset.

[

Select the menu item and confirm.

[

Select the menu item and confirm.

[

Select the menu item and confirm. The colour scheme

selected is displayed.

Selecting the colour scheme.

[

Confirm your selection.

Save setting.
Press the On-hook key to end the operation.

Contrast

Use this function to define the contrast between the

font/menu icons and the background.

Open the main menu of the handset.

[

Select the menu item and confirm.

[

Select the menu item and confirm.

[

Select the menu item and confirm. The mask for setting

the contrast is displayed.

Set the contrast.

Save setting.
Press the On-hook key to end the operation.

H/Set Settings

Display

Colour Scheme

Save

H/Set Settings

Display

Contrast

Save

Содержание HiPath 4000








































































































































Результаты поиска

Содержание HiPath 4000

Отзывы:

Похожие инструкции для HiPath 4000

Бренды по названию

Популярные бренды

Siemens HiPath 4000, Руководство по эксплуатации

Результаты поиска

Содержание HiPath 4000

Отзывы:

Похожие инструкции для HiPath 4000

Бренды по названию

Популярные бренды