Siemens HiPath 3550, Быстрый старт

Страница: 38 / 49

38
6. Exchange 2007 UM Validation Test Matrix
The following table contains a set of tests for assessing the functionality of the UM core feature set.
The results are recorded as either:
• Pass ( P )
• Conditional Pass ( CP )
• Fail ( F )
• Not Tested ( NT )
• Not Applicable ( NA )
Refer to:
• Appendix for a more detailed description of how to perform each call scenario.
• Section 6.1 for detailed descriptions of call scenario failures, if any.
No. Call Scenarios (see appendix for more
detailed instructions)
( P / CP / F / NT ) Reason for Failure (see 6.1 for more
detailed descriptions)
1 Dial the pilot number from a phone
extension that is NOT enabled for Unified
Messaging and logon to a user’s mailbox.
Confirm hearing the prompt: “Welcome,
you are connected to Microsoft Exchange.
To access your mailbox, enter your
extension…”
P
2 Navigate mailbox using the Voice User
Interface (VUI). P
3 Navigate mailbox using the Telephony
User Interface (TUI). P
4 Dial user extension and leave a voicemail.
4a Dial user extension and leave a voicemail
from an internal extension.
Confirm the Active Directory name of the
calling party is displayed in the sender
field of the voicemail message.
P
4b Dial user extension and leave a voicemail
from an external phone.
Confirm the correct phone number of the
calling party is displayed in the sender
field of the voicemail message.
CP The Siemens PBX doesn’t support caller-ID
from external numbers (all calls have 02222
calling number).