Siemens HiPath 3550, Быстрый старт

Страница: 44 / 49

44
Appendix
1.
Dial Pilot Number and Mailbox Login
• Dial the pilot number of the UM server from an extension that is NOT enabled for UM.
• Confirm hearing the greeting prompt: “Welcome, you are connected to Microsoft Exchange. To
access your mailbox, enter your extension...”
• Enter the extension, followed by the mailbox PIN of an UM-enabled user.
• Confirm successful logon to the user’s mailbox.
2. Navigate Mailbox using Voice User Interface (VUI)
• Logon to a user’s UM mailbox.
• If the user preference has been set to DTMF tones, activate the Voice User Interface (VUI)
under personal options.
• Navigate through the mailbox and try out various voice commands to confirm that the VUI is
working properly.
• This test confirms that the RTP is flowing in both directions and speech recognition is working
properly.
3. Navigate Mailbox using Telephony User Interface (TUI)
• Logon to a user’s UM mailbox.
• If the user preference has been set to voice, press “#0” to activate the Telephony User
Interface (TUI).
• Navigate through the mailbox and try out the various key commands to confirm that the TUI is
working properly.
• This test confirms that both the voice RTP and DTMF RTP (RFC 2833) are flowing in both
directions.
4. Dial User Extension and Leave Voicemail
• Note: If you are having difficulty reaching the user’s UM voicemail, verify that the coverage
path for the UM-enabled user’s phone is set to the pilot number of the UM server.
a. From an Internal Extension
a. From an internal extension, dial the extension for a UM-enabled user and leave a voicemail
message.
b. Confirm the voicemail message arrives in the called user’s inbox.
c. Confirm this message displays a valid Active Directory name as the sender of this
voicemail.