Siemens HB676GB.1, Инструкция по эксплуатации

Страница: 15 / 49

en
Time-setting options
14
To ensure an even cooking result, do not place your
food in the cooking compartment until rapid heat up is
complete.
Making settings
Ensure you have selected a suitable type of heating.
The temperature must be set to above 100 °C,
otherwise the rapid heating function cannot be started.
1.
Set the type of heating and temperature.
2.
Press the
c
button.
The c symbol appears on the left next to the
temperature. The temperature indicator starts to fill in.
When rapid heating is complete, a signal sounds. The
c
symbol goes out. Place your dish in the cooking
compartment.
Notes
■
If a cooking time has been set, this runs
independently of rapid heating and counts down
immediately when the operation is started.
■
You can use the l button to check the current
cooking compartment temperature during rapid
heating.
Cancelling
Press the
c
button. The
c
symbol disappears from
the display.
O
Time-setting options
Time-sett ing optio ns
Your appliance has different time-setting options.
Notes
■
A cooking time of up to one hour can be set exactly
to the minute.
A cooking time over one hour can be set in five-
minute increments.
■
Depending on which direction you turn the rotary
selector, the cooking time starts at a default value:
Anti-clockwise, 10 minutes,
Clockwise, 30 minutes.
■
After a time-setting option has elapsed, a signal
sounds and "Finished" appears in the status bar.
■
Using the l button, you can request information
during the operation, which then appears briefly in
the display.
Timer
You can set the timer at any time, even if the appliance
is switched off. It runs parallel to the other time settings
and has a separate audible signal. In this way, you can
tell whether it is the timer or a cooking time which has
elapsed.
The maximum setting you can apply is 24 hours.
1.
Press the
0
button.
The field for the timer opens.
2.
Use the rotary selector to set the timer duration.
The timer starts after a few seconds.
The U symbol for the timer and the time counting down
are displayed on the left in the status bar.
When the time has elapsed
An audible signal sounds. "Timer elapsed" appears in
the display. Use the
0
button to cancel the audible
signal early.
Cancelling the timer duration
Press the 0 button to open the time-setting options
menu and turn the time back. Press the
0
button to
close the menu.
Changing the timer duration
Use the
0
button to open the time-setting options
menu and change the timer time in the next few
seconds using the rotary selector. Start the timer with
the
0
button.
ꑛ
ƒ&
7RSERWWRP
KHDWLQJ
PLQV
Time-setting option Use
Q
Timer The timer functions like an egg timer. An
audible signal sounds once the set time
has elapsed.
+
Cooking time A signal sounds once a set cooking time
has elapsed. The appliance switches off
automatically.
* End time Set a cooking time and an end time. The
appliance switches off automatically so
that the operation ends at the desired
time.