Basic settings
en
21
a
Once the time has elapsed, the display shows the
time as zero.
4.
Switch off the appliance.
15 Basic settings
You can configure the appliance to meet your needs.
15.1 Overview of the basic settings
Here you can find an overview of the basic settings and factory settings. The basic settings depend on the features
of your appliance.
Display
Basic setting
Selection
Signal duration upon completion of a time or
timer period
= 10 seconds
= 30 seconds
1
= 2 minutes
Waiting time until a setting is applied
= 3 seconds
1
= 6 seconds
= 10 seconds
Button tone when pressing a button
= off
= on
1
Brightness of the display illumination
= dark
= medium
1
= bright
Time display
= hide the time
= display the time
1
Childproof lock can be adjusted
= no
= yes
1
= yes, with locked door
Interior lighting during operation
= no
= yes
1
Cooling fan run-on time
= short
= medium
1
= long
= extra-long
Telescopic shelves retrofitted
2
= no
1
(for rails and 1-level pull-out)
= yes (for 2- and 3-level pull-out)
Sabbath mode available
= no
1
= yes
Water hardness
"Setting the water hardness", Page 22
= softened
= soft (up to 1.5 mmol/l)
= medium (1.5–2.5 mmol/l)
= hard (2.5–3.8 mmol/l)
1
= very hard (above 3.8 mmol/l)
Reset all values to factory settings
= no
1
= yes
..
Home Connect Settings
1
Factory setting (may vary according to model)
2
Depending on the appliance specifications
15.2 Changing basic settings
Requirement:
The appliance is switched off.
1.
Press and hold the button for approximately
four seconds.
a
The first basic setting appears in the display,
e.g. .
2.
Use the temperature selector to change the setting.
3.
Use the or button to switch to the next basic
setting.
4.
To save the changes, press and hold the button
for approx. four seconds.
Note:
Your changes to the basic settings will be re-
tained even after a power failure.
