Before using for the first time
en
11
3.
Push the accessory all the way in, making sure that
it does not touch the appliance door.
Note:
Take any accessories that you will not be using
out of the cooking compartment while the appliance is
in operation.
Combining accessories
You can combine the wire rack with the universal pan
to catch any liquid that drips down.
1.
Place the wire rack on the universal pan so that
both spacers are on the rear edge of the univer-
sal pan.
2.
Insert the universal pan between the two guide rods
for a shelf position. In so doing, the wire rack is on
top of the upper guide rod.
Wire rack
on univer-
sal pan
5.3 Other accessories
You can purchase other accessories from our after-
sales service, specialist retailers or online.
You will find a comprehensive range of products for
your appliance in our brochures and online:
www.siemens-home.bsh-group.com
Accessories vary from one appliance to another. When
purchasing accessories, always quote the exact
product number (E no.) of your appliance.
You can find out which accessories are available for
your appliance in our online shop or from our after-
sales service.
6 Before using for the first time
Configure the settings for initial start-up. Clean the ap-
pliance and accessories.
6.1 Initial use
You need to make settings for initial use before you
can use your appliance.
Setting the time on the clock
Once the appliance has been connected to the mains
or following a power failure, the time flashes on the dis-
play. The time starts at "12:00". Set the current time.
Requirement:
The function selector must be set to the
"Off" position .
1.
Use the or button to set the time.
2.
Press the button.
a
The time that is set appears on the display.
Tip:
You can go to the basic settings
specify whether or not the time should be shown on
the display.
Reference to setting the water hardness
▶
Set the water hardness.
"Setting the water hardness", Page 22
6.2 Cleaning the appliance before using it
for the first time
Clean the cooking compartment and accessories be-
fore using the appliance to prepare food for the first
time.
1.
Remove any accessories and leftover packaging,
such as polystyrene pellets, from the cooking com-
partment.
2.
Before heating the appliance, wipe the smooth sur-
faces in the cooking compartment with a soft, damp
cloth.
3.
Fill the water tank.
"Filling the water tank", Page 13
4.
Keep the room ventilated while the appliance is
heating.
5.
Set the type of heating with steam assistance and
the temperature.
"Steam-assisted cooking", Page 12
Type of heat-
ing
3D hot air with steam assist-
ance
Temperature
200 ºC
Cooking time
30 minutes
6.
Switch off the appliance after the specified cooking
time.
7.
Wait until the cooking compartment has cooled
down.
8.
Empty the water tank and dry the cooking compart-
ment.
"After every steam operation", Page 13
9.
Set the type of heating with steam assistance and
the temperature.
Type of heat-
ing
Top/bottom heating
Temperature
240 °C
Cooking time
30 minutes
10.
Switch off the appliance after the specified cooking
time.
11.
Wait until the cooking compartment has cooled
down.
12.
Clean the smooth surfaces with soapy water and a
dish cloth.
13.
Clean the accessories using soapy water and a dish
cloth or soft brush.
