31
Using the handset on the base
Gigaset SL910H / IM1 EN / A31008-M2370-R101-1-4N19 / settings-pabx.fm / 22.12.2011
V
e
rsion 4.
1,
21
.1
1.2
00
7
Using the handset on the base
Registering a handset to another Gigaset SL910/SL910A base
You can register your handset on up to four bases.
You must initiate registration of the handset on the base (1) and on the handset (2). Once registration
is complete, the handset returns to idle status. If multiple handsets are registered, the internal
number of the handset is displayed in the display status bar, e.g.,
INT 1
. If not, repeat the procedure.
De-registering the handset
You want to de-register the handset currently being used.
¤
In the
Settings
menu (
page 13), touch
[
É
Handsets and Base]
.
¤
Touch
De-register
.
¤
If necessary, enter the system PIN.
¤
Confirm PIN with
è
.
¤
Handset de-reg-
istration is confirmed with
Yes
.
If the handset is still registered to other bases, it switches to the base with the best reception
(
Best Base;
Changing the base
If your handset is registered to more than one base, you can set it to a particular base or to the base
that has the best reception (
¤
In the
Settings
menu (
page 13), touch
[
É
Handsets and Base]
.
¤
Touch
Connected to Base
’
.
¤
Select the desired base or
Best Base
(
Ø
= set).
1) On the base
¤
Press and
hold
the registration/paging key on the base (approx. 3 seconds).
2) On the handset
¤
In the
Settings
menu (
page 13), touch
[
É
Handsets and Base]
and then
Register
.
If the handset is already registered to four bases:
¤
Touch the base where the registration should be overwritten, e.g.,
Base 2
. The handset
searches for a base that is ready for registration.
¤
If necessary, enter the system PIN for the base (max. 8 digits) and confirm with
è
.