Siemens Gigaset SE365 WLAN Скачать руководство пользователя страница 20 | Manualshive

Страница: 20 / 97

background image

17

First Steps

Gigaset SE365 WLAN / englisch / A31008-M1064-R101-1x-7619 / first_steps.fm / 19.09.2007

Sc

hablone 2

005_0

7_2

7

Access point operating mode

ì

Press the registration button on the device’s back panel to start WPS registration.

ì

Within two minutes, activate WPS registration for the wireless network adapter on
the PC or the repeater. The client gets the security data for the Gigaset SE365 WLAN
(SSID and pre-shared key) and is thus registered.

Ethernet adapter operating mode

ì

Press the registration button on the device’s back panel to start the WPS registration
with an access point.

ì

Within two minutes, activate the registration button at the access point. The Gigaset
SE365 WLAN gets the security data for the access point (SSID and pre-shared key)
and is thus registered.

Only one client is allowed to register during a single registration phase. If the device
indicates by means of the WLAN LED that more than one client tried to register, and if
the desired client has not registered successfully, an external device may have logged
on to your WLAN. In this case you should change the WPA-PSK key as soon as possible
(see page 39) and perform the WPS registration for the clients using a PIN (see
page 52).
Additional options for WPS registration are described on page 52.

WPS registration order

To establish a router/access point – repeater – PC connection proceed as follows:
1. Register the repeater at the router/access point.
2. Register the PC’s wireless network adapter at the router/access point. For that pur-

pose the PC must reside within the radio range of the router/access point.

3. Remove the PC from the range of the routers/access point and take it into the repeat-

er’s range. The WLAN connection to the repeater will be established automatically
after a while.

WLAN LED display during WPS registration:

On (300 s)

WPS registration was successful.

Flashing slowly

WPS registration is in progress.

Flashing quickly

WPS registration was not successful.

Flashing quickly
with interruption

More than one client tried to register.

«
...
18
19
20
21
22
...
»

Содержание Gigaset SE365 WLAN


































































































Отзывы:

Нет отзывов

Похожие инструкции для Gigaset SE365 WLAN

Бренд: Icom Страницы: 56

Бренд: Icom Страницы: 16

Бренд: Jata Страницы: 32

Бренд: Prem-I-Air Страницы: 7

Бренд: Cadet Страницы: 9

Бренд: Mr. Heater Страницы: 7

Бренд: Glowworm Страницы: 56

Бренд: Singer Страницы: 36

Бренд: Stahl Страницы: 45

Бренд: L.B. White Страницы: 24

Бренд: Jung Страницы: 6

Бренд: Mosebach Страницы: 18

Бренд: Archgard Страницы: 53

Бренд: Quick Страницы: 24

Бренд: DeLonghi Страницы: 14

Бренд: S&P Страницы: 64

Бренд: C. Crane Страницы: 4

Бренд: VALBERG Страницы: 36

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды