Siemens Gigaset S675 IP Скачать руководство пользователя страница 215

Страница: 215 / 254

213

Service (Customer Care)

S675IP / USA-CAN eng / A31008-xxxx-xxxx-x-xxxx / appendix.fm / 14.05.2009

ion 8,

.09

.200

to failures or defects caused by misuse, abuse, accidents, physical damage, abnormal

operation, improper handling or storage, neglect, alterations, unauthorized installa-

tion, removal or repairs, failure to follow instructions, problems caused by the carrier's

network coverage, exposure to fire, water or excessive moisture or dampness, floods,

or extreme changes in climate or temperature, acts of God, riots, acts of terrorism,

spills of food or liquids, viruses or other software flaws introduced into the Product or

other acts which are not the fault of Gigaset NAM and which the Product is not spec-

ified to tolerate, including damage caused by mishandling or blown fuses.

– Products which have had warranty stickers, electronic serial number and/or serial

number label removed, altered, rendered illegible or fraudulently applied to other

equipment.

– Signal reception problems (unless caused by defect in material or workmanship in the

Product).

– Products operated outside published maximum ratings.
– Performance of the Products when used in combination with other products or equip-

ment not manufactured, supplied or authorized by Gigaset NAM.

– Consumables (such as batteries and fuses).
– Payments for labor or service to representatives or service centers not authorized to

perform product maintenance by Gigaset NAM.

– Loss of data.
– Testing and examination discloses that the alleged defect or malfunction in the Prod-

uct does not exist.

This warranty does not cover customer education, instruction, installation or removal,

set up adjustments, problems related to service(s) provided by a carrier or other service

provider, and/or signal reception problems. Gigaset NAM shall not be responsible for soft-

ware, firmware, information, or memory data contained in, stored on, or integrated with

any Products returned for repair, whether under warranty or not. This warranty is valid

only in the country in which it is purchased (

i.e.

, the United States of America or Canada

respectively, but not both).

USE WITH ACCESSORIES NOT SUPPLIED BY GIGASET NAM OR NOT OTHERWISE

EXPRESSLY AUTHORIZED BY GIGASET NAM MAY VOID WARRANTY.

4. WARRANTY CLAIM PROCEDURE

All warranty claims must be made by notifying Gigaset NAM prior to the expiration of the

warranty period. Gigaset NAM's obligation to provide warranty support shall not extend

past the end of the warranty period, except that any product repaired or replaced during

the warranty period shall continue to be warranted for the balance of such warranty

period or thirty (30) days, whichever is greater.

Throughout the warranty period, Support will be available 7:00 a.m. – 7:00 p.m. EST

Monday-Saturday (English) and 7:00 a.m. - 12:00 p.m. (noon) EST Monday-Saturday

(French), excluding National holidays. Support service will be provided for you by access-

ing the toll free customer service number:

1-866-247-8758

5. LIMITATION OF WARRANTY

Gigaset NAM makes no warranty or representation that the software in the Products will

meet your requirements or will work in combination with any hardware or applications

software products provided by third parties, that the operation of the software will be

uninterrupted or error free, or that all defects in the software products will be corrected.

Содержание Gigaset S675 IP































































































































































































































































Результаты поиска

Содержание Gigaset S675 IP

Отзывы:

Похожие инструкции для Gigaset S675 IP

Бренды по названию

Популярные бренды

Siemens Gigaset S675 IP, Руководство пользователя

Результаты поиска

Содержание Gigaset S675 IP

Отзывы:

Похожие инструкции для Gigaset S675 IP

Бренды по названию

Популярные бренды