Siemens Gigaset S675 IP Скачать руководство пользователя страница 210

Страница: 210 / 254

208

FCC / ACTA Information

S675IP / USA-CAN eng / A31008-xxxx-xxxx-x-xxxx / appendix.fm / 14.05.2009

ion 8,

.09

.200

FCC / ACTA Information

Warning:

Changes or modifications to this unit not expressly approved by Gigaset Com-

munications USA LLC could void the FCC authority to operate the equipment. This

includes the addition of any external antenna device.
This equipment complies with Part 68 of the FCC rules and the requirements adopted by

the ACTA. On the bottom of the base station is a label that contains, among other infor-

mation, a product identifier in the format US:AAAEQ##TXXXX. If requested, this number

must be provided to the telephone company.
A plug and jack used to connect this equipment to the premises wiring and telephone

network must comply with the applicable FCC Part 68 rules and requirements adopted

by the ACTA. A compliant telephone cord and modular plug is provided with this product.

It is designed to be connected to a compatible modular jack that is also compliant. See

installation instructions for details.
The REN is used to determine the number of devices that may be connected to a tele-

phone line. Excessive RENs on a telephone line may result in the devices not ringing in

response to an incoming call. In most but not all areas, the sum of RENs should not

exceed five (5.0). To be certain of the number of devices that may be connected to a line,

as determined by the total RENs, contact the local telephone company. For products

approved after July 23, 2001, the REN for this product is part of the product identifier that

has the format US:AAAEQ##TXXXX. The digits represented by ## are the REN without a

decimal point (

e.g.

, 03 is a REN of 0.3). For earlier products, the REN is separately shown

on the label.
A copy of the supplier's Declaration of Conformity (SDoC) is available at this Internet

address: www.gigaset.com/docs.
If this equipment causes harm to the telephone network, the telephone company will

notify you in advance, that temporary discontinuance of service may be required. But if

advance notice isn’t practical, the telephone company will notify the customer as soon

as possible. Also, you will be advised of your right to file a complaint with the FCC if you

believe it is necessary.
The telephone company may make changes in its facilities, equipment, operations or

procedures that could affect the operation of the equipment. If this happens the tele-

phone company will provide advance notice in order for you to make necessary modifi-

cations to maintain uninterrupted service. If you experience trouble with this telephone

system, disconnect it from the network until the problem has been corrected or until you

are sure that the equipment is not malfunctioning.
If trouble is experienced with this equipment, for repair or warranty information, please

contact Support at 1-866-247-8758. If the equipment is causing harm to the telephone

network, the telephone company may request that you disconnect the equipment until

the problem is resolved. This equipment is of a type that is not intended to be repaired

by the Customer (user).
This telephone system may not be used on coin service provided by the telephone com-

pany. Connection to party line service is subject to state tariffs. Contact the state public

utility commission, public service commission or corporation commission for informa-

tion. Privacy of communications may not be ensured when using this phone.
If your home has specially wired alarm equipment connected to the telephone line,

ensure the installation of this equipment does not disable your alarm equipment. If you

have questions about what will disable alarm equipment, consult your telephone

company or a qualified installer.
This telephone system equipment has been tested and found to comply with the limits

for Class B digital device, pursuant to Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful interference, and (2)

This device must accept any interference received, including interference that may cause

undesired operation. These limits are designed to provide reasonable protection against

harmful interference in a residential installation. Some cordless telephones operate at

frequencies that may cause interference to nearby TV’s and VCR’s; to minimize or prevent

Содержание Gigaset S675 IP































































































































































































































































Результаты поиска

Содержание Gigaset S675 IP

Отзывы:

Похожие инструкции для Gigaset S675 IP

Бренды по названию

Популярные бренды

Siemens Gigaset S675 IP, Руководство пользователя

Результаты поиска

Содержание Gigaset S675 IP

Отзывы:

Похожие инструкции для Gigaset S675 IP

Бренды по названию

Популярные бренды