Siemens Gigaset M451 T CI, Руководство пользователя

Страница: 86 / 96

84
Appendix
With the exception
of the menu, access
to the set-top box is
blocked. The parental lock is
activated. Enter your PIN; the PIN 0000
(4 x zero) is set by default.
If you lose your changed PIN you
can only deactivate the parental
lock by resetting the set-top box to
the factory default settings.
The transmission
times shown in the
EPG are not correct. The time is set incorrectly
on your set-top box. Check the time displayed (to the
right in the info bar) and amend
this as appropriate in the
Time
Correction menu.
The EPG data has not been
updated for some time or
has not yet been supplied
by the provider. As long as you do not disconnect
your set-top box from the mains,
the EPG will update automatically
at regular intervals. The scope and
topicality of the data are depend-
ent however on the respective
provider.
Only some data is
available or dis-
played after a delay
in EPG mode. Some channels do not
transmit EPG data or only
for a few days in advance. The transmission of DVB-SI data is
a channel-dependent service that
is not provided by every channel.
The set-top box was dis-
connected from the mains. Switch on your set-top box and
open the EPG. The available data is
updated and is available again as
usual after a few minutes.
Problems arise in
different operating
situations. You suspect your set-top
box is malfunctioning. Update the device software if an
update is available. In the event of
serious problems, contact cus-
tomer care.
After updating the
software from the
PC, the set-top box
is no longer work-
ing as usual. Individual settings were
changed by the update. Reconfigure the set-top box.
Errors occurred during the
update (power failure,
faulty data transmission). Check the configuration of the
set-top box and re-install the
device software if necessary. In
the event of serious problems,
contact customer care.
Problem Possible cause Remedy