Siemens GIGASET C470 IP Скачать руководство пользователя страница 102

Страница: 102 / 219

Using several handsets

De-registering handsets

Gigaset C470-C475 IP / GBR / A31008-M1916-L101-1-7619 / T-NetBox_SAG-registration.fm / 7.2.08

ion 2.

08.0

1.20

Registering other handsets with Gigaset C470 IP/C475 IP

You can register other Gigaset handsets and handsets for other devices with GAP function-

ality as follows.

Begin the registration procedure

on the handset

in accordance with the handset's oper-

ating instructions.

Press and hold (for approx. 3 seconds) the registration/paging key (page 2)

on the base

station

De-registering handsets

You can de-register any registered handset from any registered Gigaset C47H handset.

Open list of internal parties.

The handset which you are using is marked with

Select the handset to be de-registered.

§Options§

Press the display key.

De-reg. H/Set No.

Select and press

§OK§

Enter the current base station system PIN (default setting: 0000).

§Yes§

Press the display key to confirm the prompt.

Press and

hold

(idle status).

The handset is de-registered immediately, even if it is not in idle status.

Locating a handset ("paging")

You can locate your handset using the base station.

Briefly

press the registration/paging key on the base station (page 2).

All handsets will ring at the same time ("paging"), even if ringer tones are switched off.

The current (local) IP address for the base station appears in the handset displays.

Ending paging

Briefly

press the registration/paging key on the base station (page 2).

Press the talk key

or end call key

on any handset.

Please note:

If six handsets are already registered to the base station, there are two options:
– The handset with the internal number 6 is in idle status: the handset you wish to register is

assigned the number 6. The handset that was previously number 6 is de-registered.

– The handset with the internal number 6 is being used: the handset you wish to register cannot be

registered.

Please note:

You can also make changes on the base station with a Gigaset S45 or S67H handset.

Содержание GIGASET C470 IP




























































































































































































































Результаты поиска

Содержание GIGASET C470 IP

Отзывы:

Похожие инструкции для GIGASET C470 IP

Бренды по названию

Популярные бренды

Siemens GIGASET C470 IP, Руководство пользователя

Результаты поиска

Содержание GIGASET C470 IP

Отзывы:

Похожие инструкции для GIGASET C470 IP

Бренды по названию

Популярные бренды