Siemens GIGASET C470 IP Скачать руководство пользователя страница 84

Страница: 84 / 219

E-mail notifications

Opening the incoming mail list

Gigaset C470-C475 IP / GBR / A31008-M1916-L101-1-7619 / email.fm / 7.2.08

ion 2.

08.0

1.20

E-mail notifications

Your phone will notify you when new e-mail messages have been received on your incom-

ing e-mail server.
You can set your phone to periodically connect to your incoming e-mail server and check

whether you have new e-mail.
Any new messages that have been received are displayed on all Gigaset C47H handsets

that have been registered: you will hear an advisory tone, the message key

will flash

and the

icon will be displayed in the idle display.

You can use your phone to connect to the incoming e-mail server and display the sender,

date and time of receipt and subject for every e-mail message in the list of incoming mail

(page 81).

Preconditions:

You have set up an e-mail account with an Internet provider.

The incoming e-mail server uses the POP3 protocol.

You have stored the name of the incoming e-mail server and your personal access data

(account name, password) in the phone (page 154).

Opening the incoming mail list

Messaging

E-mail

Or if new e-mail messages have been received (the message key

is flashing):

E-mail:

The telephone establishes a connection to the incoming e-mail server. A list of e-mail mes-

sages that are stored there will be displayed.
New unread messages appear above old read messages. The most recent entry is at the

head of the list.
The following details are displayed for each e-mail: name or e-mail address of the sender

(one line, abbreviated if necessary) and date and time (date and time will only display cor-

rect values if sender and recipient are located in the same time zone).

Please note:

The

icon is also displayed if new SMS messages or messenger messages have been received.

If new e-mail messages have been received, pressing the message key

will display them in list

E-mail:

Содержание GIGASET C470 IP




























































































































































































































Результаты поиска

Содержание GIGASET C470 IP

Отзывы:

Похожие инструкции для GIGASET C470 IP

Бренды по названию

Популярные бренды

Siemens GIGASET C470 IP, Руководство пользователя

Результаты поиска

Содержание GIGASET C470 IP

Отзывы:

Похожие инструкции для GIGASET C470 IP

Бренды по названию

Популярные бренды