Siemens Gigaset C185 Скачать руководство пользователя страница 9

Страница: 9 / 45

First Steps

Gigaset C185 / CAN usengl / A31008-M1972-R401-1-5819 / starting.fm / 24.6.09

Range and reception indicator

Range:

Up to 984 feet in the open

Up to 165 feet in buildings

Reception indicator:

The display shows if the handset is linked

to the base station:

is on: handset is linked to the base

station.

flashes: no reception; handset is out

of range or not registered.

Connecting the base station

First

connect the yellow marked plug

pin to the base station's socket (yellow

marked) and then the AC adapter to the

AC outlet (see below).

Afterwards connect the phone jack as

shown below.

1 110-V power adapter

2 Back of the base station

3 Phone jack with phone cord

Please note:

The power adapter must

always be

connected

, as the phone will not oper-

ate without an electrical supply.

Your answering machine is set to give a

standard announcement.

Setting up the handset for use

All supplied handsets are already

registered to the base station by factory

settings.
Carry out the following steps for each

handset.

Inserting the batteries

Open the battery cover.

Insert the batteries according to the

correct polarity (see diagram).

Close the cover, and press the top so

that it clicks into place.

Caution:

Use only rechargeable Nickel-metal hydride

(NiMH) UL-approved AAA batteries. Never use

a conventional (non-rechargeable) battery or

other battery types as this could result in sig-

nificant health risks and personal injury. For

example, the batteries could explode. The

phone could also malfunction or be damaged

as a result of using batteries that are not of the

recommended type.

Note:

If attached, remove the belt clip before open-

ing the battery cover.

Содержание Gigaset C185














































Результаты поиска

Содержание Gigaset C185

Отзывы:

Похожие инструкции для Gigaset C185

Бренды по названию

Популярные бренды

Siemens Gigaset C185, Руководство пользователя

Результаты поиска

Содержание Gigaset C185

Отзывы:

Похожие инструкции для Gigaset C185

Бренды по названию

Популярные бренды