22
Operating the answering machine
Gigaset C185 / CAN usengl / A31008-M1972-R401-1-5819 / answnetwork-mailbox.fm / 24.6.09
Activating Remote Access
§Menu§
¢
Answer Machine
¢
Settings
¢
Remote Access
On
/
Off
Select and press
§OK§
to confirm
your selection.
Calling the answering machine and
playing back messages
~
Dial your own number.
; ~
While listening to your
announcement, press the
;
key and enter the system PIN
(default setting: 0000,
You will be informed whether any new
messages have been recorded. The mes-
sages are then played back. You can now
operate the answering machine using the
keypad.
Operating the answering machine using
the keypad
The following keys are used:
Activating the answering machine
~
Dial your own number.
¤
Allow the phone to ring until the ring
back tone stops and the phone answers
with a beep.
~
Enter system PIN (default set-
ting: 0000, see page 28).
u
If messages are stored on the answer-
ing machine:
The answering machine starts play-
back.
¤
Press the
H
key to stop playback.
¤
After the beep press the
G
key to
activate the answering machine.
Or
¤
Listen to the playback until you hear
two beeps (=the end of message
playback)
¤
Press the
G
key to activate the
answering machine.
u
If no (new or old) messages are stored
on the answering machine:
You will hear a beep. A status message
is played back and informs that no mes-
sages are stored on the answering
machine.
¤
Press the
G
key to activate the
answering machine.
You will hear a beep. Your answering
machine is now activated and the acti-
vated announcement is played back.
Deactivating the answering machine
~
Dial your own number.
; ~
While listening to your
announcement, press the
;
key and enter the system PIN
(default setting: 0000,
9
Press
the
9
key.
You will hear a beep. Your answering
machine is now deactivated.
0
Delete the current message.
A
Repeat the previous message.
B
Play the message.
3
Skip to the next message.
G
Turn on the answering machine.
H
Stop
message
playback.
9
Turn off the answering machine.
;
Enter the remote access code if
the answering machine is on.
Note:
After message playback, if no key operation
is detected for 10 seconds, the call will be
terminated.