Function
19
Building Technologies
009865_b_en_--.doc
Fire Safety & Security Systems
11.2007
5.4 Operation
modes
The radio gateway has the following operation modes:
z
Normal operation
z
Startup mode
z
Configuration mode
5.4.1 Normal
operation
The radio gateway is in the intended operating mode. All radio detectors in the
radio cell are monitored.
5.4.2 Startup
mode
As soon as power is supplied to the radio gateway, it goes into startup mode. In
startup mode the radio gateway checks whether any radio detectors are registered.
If the radio detectors of the radio cell are registered, the radio gateway changes
from startup into normal operation.
Otherwise, the radio gateway changes directly from startup mode to configuration
mode.
see also:
Î
8.2 Putting the radio gateway into operation, Page 33
5.4.3 Configuration
mode
In configuration mode the radio connection is established with all radio detectors.
The system searches for free radio channels and registers the radio detectors on
the radio gateway.
When a radio detector is removed or added, the radio gateway is equally set in
configuration mode.
The radio gateway is set in configuration mode by pressing the button on the radio
gateway as follows:
z
long: to remove a radio detector
z
short: to add a radio detector
After at maximum 15 minutes without any manipulation, the radio gateway changes
from configuration mode to normal operation.
