Siemens EX9 LX Series, Инструкция по эксплуатации

Страница: 33 / 44

Home Connect
en
33
Disconnecting from the network
Disconnecting from the network
You can disconnect your hob from the network at any
time.
Note:
If your hob is disconnected from the network, it is not
possible to operate it using Home Connect.
1.
Switch on the hob.
2.
Touch and hold the
0
symbol for four seconds.
The product information is displayed.
3.
Touch the
0
symbol repeatedly until the
•’‚
setting appears.
„
lights up on the cooking position display.
4.
Set the
‹
value on the control panel.
This disconnects the appliance from your home
network; the
D
symbol will go out on the control panel.
Connecting to the network
Connecting to the network
1.
Switch on the hob.
2.
Touch and hold the
0
symbol for four seconds.
The product information is displayed.
3.
Touch the
0
symbol repeatedly until the
•’‚
setting appears.
‹
lights up on the cooking position display.
4.
On the control panel
set the "Connect automatically"
‚
value or
or the "Connect manually"
ƒ
value.
5.
Follow the instructions as per
~
"Automatic
registration in the home network" or
~
"Manual
registration in the home network" .
Connect to the app
If the Home Connect app is installed on your mobile
device, you can connect it to your hob.
Notes
■
The appliance must be connected to the network.
■
The app must be open and be set up.
■
If your extractor hood is directly connected, first
disconnect the hob from your home network and
then initiate the connection process
again.
~
"Disconnecting from the network"
on page 33
~
"Connecting to the network"
on page 33
1.
Switch on the hob.
2.
Touch and hold the
0
symbol for four seconds.
The product information is displayed.
3.
Touch the
0
symbol repeatedly until the
•’ƒ
setting appears.
‹
lights up on the cooking position display.
4.
Set the
‚
value on the control panel.
5.
Follow the instructions in the app to complete the
connection process.
Settings via app
Using the Home Connect app, you can easily access
the basic settings for your hob and send settings for the
cooking zones to the hob.
Notes
■
Before you can change the basic settings, the hob
must be switched off.
■
If the appliance is being operated by means of the
controls on the appliance itself, this mode of
operation always has priority. During this time, it is
not possible to operate the appliance using the
Home Connect app.
■
When the appliance is delivered, the settings
transmission option is already activated by default.
■
If the settings transmission option has been
deactivated, only the hob's operating statuses will be
displayed in the Home Connect app.
1.
Switch on the hob.
2.
Touch and hold the
0
symbol for four seconds.
The product information is displayed.
3.
Touch the
0
symbol repeatedly until the
•’…
setting appears.
4.
To activate the transfer, select the
‚
value on the
control panel. To deactivate the transfer, select the
‹
value.