Siemens EX9 LX Series Скачать руководство пользователя

Страница: 19 / 44

Frying Sensor

Frying Sensor

Frying Sensor

This function can be used to fry food while maintaining

the suitable frying pan temperature.
The cooking zones that have this function are identified

by the roasting function symbol.

Advantages when frying

■

The hotplate only heats up if this is required to

maintain the temperature. This saves energy and

prevents the oil or fat from overheating.

■

The frying function reports when the empty frying

pan has reached the optimum temperature for

adding oil and then for adding the food.

Notes

■

Do not place a lid on the pan. Otherwise, the

function does not activate correctly. You can use a

splash guard to prevent splashes of grease.

■

Use suitable oil or fat for frying. If butter, margarine,

extra virgin olive oil or lard is used, set heat setting

1 or 2.

■

Never leave a frying pan, with or without food,

unattended when it is being heated.

■

If the hotplate is a higher temperature than the

cookware or vice versa, the frying sensor will not be

activated correctly.

Frying pans for the frying sensor

Frying pans specifically suited for use with the frying

sensor are available. These optional accessories can

be purchased from specialist retailers or through our

technical after-sales service. Always quote the relevant

reference number.

■

HZ390210 15 cm frying pan.

■

HZ390220 19 cm frying pan.

■

HZ390230 21 cm frying pan.

■

HZ390512 teppan yaki. Recommended for the

flexible cooking zone only.

■

HZ390522 griddle plate. Recommended for the

flexible cooking zone only.

These frying pans have a non-stick coating so that you

can fry food with only a small amount of oil.

Notes

■

The frying sensor has been configured specifically

for this type of frying pan.

■

Ensure that the diameter of the base of the frying

pan corresponds to the size of the hotplate. Put the

frying pan in the centre of the hotplate.

■

Using a frying pan of a different size or one that is

poorly positioned on the flexible cooking zones may

result in the frying sensor not being activated. See

the section on

"Flex Zone"

■

Other frying pans may overheat. They may reach a

temperature above or below the selected

temperature setting. Try the lowest temperature

setting to begin with and change it if necessary.

Содержание EX9 LX Series













































Результаты поиска

Содержание EX9 LX Series

Отзывы:

Похожие инструкции для EX9 LX Series

Бренды по названию

Популярные бренды

Siemens EX9 LX Series, Инструкция по эксплуатации

Результаты поиска

Содержание EX9 LX Series

Отзывы:

Похожие инструкции для EX9 LX Series

Бренды по названию

Популярные бренды