Siemens EX9 LX Series Скачать руководство пользователя

Страница: 32 / 44

Home Connect

The appliance automatically tries to connect to the

app and the setting

•’ƒ

is displayed. The value

‚

flashes in the control panel.

Start the app on the mobile device and follow the

instructions for manual network registration.

The registration procedure has been completed once

the

‹

value appears on the cooking position display.

Home Connect settings

You can adjust Home Connect to suit your

requirements at any time.
In the basic settings for your hob, navigate to the Home

Connect settings to display network and appliance

information.

Notes

■

The

•’ƒ

setting is only displayed if the appliance is

connected to the home network.

■

The

•’„

setting is only displayed if the appliance

has once connected to a network.

■

The

•’†

setting is only displayed if an update is

available.

■

The

•’‡

setting is only displayed if Customer

Service is attempting to connect to the appliance.

You can end this at any time after granting access.

■

The

•’ˆ

and

•’‰

settings are only displayed if

there is a connection to WLAN.

Deactivating Wi-Fi

If Wi-Fi has been activated, you can use the Home

Connect functions.

Note:

In networked standby mode, your appliance requires a

maximum of 2 W.

Switch on the hob.

Touch and hold the

symbol for four seconds.

The product information is displayed.

Touch the

symbol repeatedly until the

•’„

setting appears.

‚

lights up on the cooking position display.

Set the

‹

value on the control panel.

This deactivates Wi-Fi; the

symbol will go out on the

control panel.

Symbol

Function

•’‚

Registration in the home network (WLAN)

‹

Not connected /disconnect network.

‚

Connect automatically.

Connect manually.

„

Connected.

•’ƒ

Connection to app

‹

Not connected.

‚

Connect.

•’„

Connect to WLAN

‹

Radio module switched off.

‚

Radio module switched on.

•’…

Settings via app

‹

Switched off.

‚

Switched on.*

•’†

Software update

‚

Update available and ready for installation.

Starting installation.

•’‡

Remote access by Customer Service

‹

Not permitted.

‚

Permitted.

* Basic setting

•’ˆ

WLAN signal strength

‹

Not connected to home network (WLAN).

‚

Signal strength 1 (poor)

Signal strength 2 (moderate)

„

Signal strength 3 (good)

•’‰

Connection to Home Connect server

‹

Not connected.

‚

Connected.

Symbol

Function

* Basic setting

Содержание EX9 LX Series













































Результаты поиска

Содержание EX9 LX Series

Отзывы:

Похожие инструкции для EX9 LX Series

Бренды по названию

Популярные бренды

Siemens EX9 LX Series, Инструкция по эксплуатации

Результаты поиска

Содержание EX9 LX Series

Отзывы:

Похожие инструкции для EX9 LX Series

Бренды по названию

Популярные бренды