Imp
ort
Ap
plia
nce
s.c
om
THE EASIEST WAY TO SELF-IMPORT APPLIANCES DIRECT FROM EUROPE.
en
Home Connect
30
Notes
■
The
•’ƒ
setting is only displayed if the appliance is
connected to the home network.
■
The
•’„
setting is only displayed if the appliance
has once connected to a network.
■
The
•’†
setting is only displayed if an update is
available.
■
The
•’‡
setting is only displayed if Customer
Service is attempting to connect to the appliance.
You can end this at any time after granting access.
■
The
•’ˆ
and
•’‰
settings are only displayed if
there is a connection to WLAN.
Deactivating WLAN
If WLAN is activated, you can use the Home Connect
functions.
Note:
In networked standby mode, your appliance
requires max. 2 W.
1.
Touch the
0
symbol for 4 seconds.
Product information will be displayed.
2.
Touch the
0
symbol repeatedly until the
•’„
setting appears.
‚
lights up on the cooking position display.
3.
Set the
‹
value on the control panel.
WLAN is deactivated and the
D
symbol on the control
panel goes out.
Disconnecting from the network
Disconnecting from the network
You can disconnect your hob from the network at any
time.
Note:
If your hob is disconnected from the network, it is
not possible to operate it using Home Connect.
1.
Touch the
0
symbol for 4 seconds.
Product information will be displayed.
2.
Touch the
0
symbol repeatedly until the
•’‚
setting appears.
„
lights up on the cooking position display.
3.
Set the
‹
value on the control panel.
The appliance is disconnected from the home network
and the
D
symbol on the control panel goes out.
Connecting to the network
Connecting to the network
1.
Touch the
0
symbol for 4 seconds.
Product information will be displayed.
2.
Touch the
0
symbol repeatedly until the
•’‚
setting appears.
‹
lights up on the cooking position display.
3.
On the control panel
set the "Connect automatically"
‚
value or
or the "Connect manually"
ƒ
value.
4.
Follow the instructions in the section entitled
"Automatic registration in the home network" or
"Manual registration in the home network".
Connect to the app
If the Home Connect app is installed on your mobile
device, you can connect it to your hob.
Notes
■
The appliance must be connected to the network.
■
The app must be open and be set up.
1.
Touch the
0
symbol for 4 seconds.
Product information will be displayed.
2.
Touch the
0
symbol repeatedly until the
•’ƒ
setting appears.
‹
lights up on the cooking position display.
•’ˆ
WLAN signal strength
‹
Not connected to home network (WLAN).
‚
Signal strength 1 (poor)
ƒ
Signal strength 2 (moderate)
„
Signal strength 3 (good)
•’‰
Connection to Home Connect server
‹
Not connected.
‚
Connected.
Symbol
Function
* Basic setting