Siemens ER12553EU, Инструкция по эксплуатации, установке и уходу

Страница: 25 / 28

25
What has gone
wrong?
Probable cause Solution
- Defective fuse. - Check the fuse in the main fuse
box and change it if necessary.
- The automatic fuse may have
fused or the trip switch has
tripped. - Check the main fuse box to see
whether the automatic trip switch
or a differential switch has
tripped.
- There may be food or
cleaning residue between the
sparker and the burners. - Carefully clean the spaces
between the sparker and the
burners.
- The burners are wet. - Dry the burner covers and
sparkers carefully
- The burner covers are not
properly seated. - Make sure that the burner
covers are properly seated.
The electric sparker
does not work
- No electrical connection - Make sure that the electrical
connection has been done
correctly.
- The different parts of the
burners have not been properly
seated. - Place the different pieces in the
correct position.
The flames on the
burners are not
uniform
- The grooves on the burners'
gas outlets are dirty. - Clean the grooves on the
burners' gas outlets.
- The gas mains are turned off. - Turn on all mains' taps.
...if the gas flow does
not seem normal, or
no gas comes out?
- If the gas is coming from a
gas bottle, it may be empty. - Replace the gas bottle with a
full one.
There is a smell of
gas in the kitchen
area
- There may be a leak at the
connection between the pipe
and the main gas supply. - Make sure that the connection
is airtight.
- The control knob has not
been pressed in for long
enough. - Light the burner, and then keep
the control knob pressed in a few
seconds longer.
...if the safety valves
on the different
burners do not work?
- The grooves on the burners'
gas outlets are dirty. - Clean the grooves on the
burners' gas outlets.