Siemens ER12553EU, Инструкция по эксплуатации, установке и уходу

Страница: 14 / 28

14
In compliance with the currently effective
regulations, the hob must be connected to the gas
pipe with a stop valve. This valve must be easily
accessible at all times.
After connecting the unit to the gas mains always
check the seal of the connection using a solution of
soapy water.
Never check the seal using a flame.
Using flexible pipes:
•
do not allow the pipes to be constricted or
crushed;
•
the pipes must not be subjected to traction or
twisting forces;
•
do not allow the pipes to come into contact with
cutting or sharp edges, etc...
•
do not allow any gas connecting pipe and/or any
electric connecting wire to come into contact
with the bottom of the hob; make sure that the
entire length of the pipes and/or electric
connecting wire is available for inspection.
Particular care must be taken to ensure leak proof
connection.
The maximum permissible length of the gas
connecting pipe is 2.5 m
.
IMPORTANT!!!
This safety gas tube must be routed in such a way
that it is not fed through hot areas and does not
come into contact with any hot parts of the
appliance, e.g. underside of hob.
Installation of the tube must ensure that it runs freely
and that it cannot come into contact with any
movable parts of the kitchen cabinets, e.g. a drawer.