Siemens ED885RB90 Series, Инструкция по эксплуатации, Страница: 23 / 48

Trouble shooting
en
23
3
Trouble shooting
Trouble s hooting
Sometimes certain faults detected can be easily
resolved. Before calling the Technical Assistance
Service, bear in mind the following advice:
Fault Possible cause Solution
General electrical fault. The domestic circuit breaker has tripped. Check the fuse box to see whether the circuit breaker has
tripped.
The electric ignition is not
working.
There may be food remnants or cleaning product resi-
dues between the ignition plugs and the burners.
The spaces in between the ignition plugs and the burners
must be clean.
The burners are wet. Carefully dry the burner caps.
The burner caps have not been fitted correctly. Check whether the caps are fitted correctly.
Power cut Light the burners manually.
Uneven burner flame The burner parts have not been fitted correctly. Fit the burner parts correctly.
There is dirt in the burner openings. Clean the burner openings.
The gas does not appear to be
flowing normally or there is no
gas being produced at all.
The intermediate valves are closed. Open the intermediate valves.
If you are using a gas cylinder, check that it is not empty. Replace the gas cylinder.
There is a smell of gas in the
kitchen.
Gas may be leaking out where the gas cylinder is con-
nected.
Check that the gas cylinder connection is not leaking.
The burner goes out straight
after it is ignited.
You have not held the control knob down long enough. Once the burner is lit, press and hold the control knob for
a few seconds.Push it in firmly.
There is dirt in the burner openings. Clean the burner openings.