SIEMENS ADSL E-110_E-110-I user manual
1. On
the
NAT Rule - Add
page, select
FILTER
from the
Rule Flavor
drop-down list.
2. Define the rule ID and select the interface.
3. From
the
Protocol
drop-down list, select a protocol to which this rule applies, or choose
ANY
if the
rule applies to all data.
4. In
the
Local Address From/To
fields, type the starting and ending IP addresses that identify the range
of private address you want to be translated. Or, type the same address in both fields.
If you specify a range, each address will be translated in sequence to a corresponding address in a
range of global addresses (which you specify in step 5).
5. In
the
Global Address From/To
fields, type the starting and ending address that identify the range of
public IP addresses to translate your private addresses to. Or, type the same address in both fields (if
you also specified a single address in step 4).
6. In
the
Destination Address From/To
fields specify a destination address (or range), in the
Destination Port From/To
fields a destination port (or range), or both. You can specify a single value
by entering that value in both fields.
a. Specify a destination address (or range) if you want this rule to apply only to outbound traffic to
the address (or range).
If you enter only the network ID portion of the destination address, then the rule will apply to
outbound traffic to all computers on network.
b. Specify a destination ports (or range) if you want this rule to apply to any outbound traffic to the
types of servers identified by that port number.
c. Specify both a destination address (or range) and a destination port (or range) if you want this
translation rule to apply to accesses to the specified server type at the specified location.
7. Complete as described for general procedure (steps 6 to 10).
The bimap rule: Performing two-way translations
Unlike the other NAT flavors, the bimap flavor performs address translations in both the outgoing and
incoming directions.
In the incoming direction, when the specified interface receives a packet destined to your public IP address,
this address is translated to the private IP address of a computer on your LAN.
In the outgoing direction, the private source IP address in a data packet is translated to the LAN’s public IP
address.
52
Rev:01_040220