Siemens E-110 Скачать руководство пользователя страница 52

Страница: 52 / 90

SIEMENS ADSL E-110_E-110-I user manual

The

NAT Global Information

table contains the following fields:

Field

Description

TCP Idle Timeout(sec)

For a NAT translation session on data that uses the TCP protocol, the

translation will no longer be performed if no matching data packets are

received after the specified time has elapsed.

TCP Close Wait(sec)

For a NAT translation on data using the TCP protocol, after a communication

session has been closed, the translation will no longer be performed if no

matching data packets are received after the specified time has elapsed.

TCP Def Timeout(sec)

For a NAT translation session on data that uses the TCP protocol, the

translation will no longer be performed if no matching data packets are

received after the specified time has elapsed.

UDP Timeout(sec)

Same as TCP Idle Timeout, but for UDP packets.

ICMP Timeout(sec)

Same as TCP Idle Timeout, but for ICMP packets.

GRE Timeout(sec)

Same as TCP Idle Timeout, but for GRE packets.

Default Nat Age(sec)

For all other NAT translation sessions, the number of seconds after which a

translation session will no longer be valid.

NAPT Port Start/End

When an napt rule is defined, the source ports will be translated to

sequential numbers in this range.

2. If you change any values, click

[Apply]

. A page gives a receipt for the changes.

3. Select

Admin

Commit & Reboot

and click

[Save]

to save your changes to permanent storage.

Rev:01_040220

Содержание E-110



























































































Результаты поиска

Содержание E-110

Отзывы:

Похожие инструкции для E-110

Бренды по названию

Популярные бренды

Siemens E-110, Руководство пользователя

Результаты поиска

Содержание E-110

Отзывы:

Похожие инструкции для E-110

Бренды по названию

Популярные бренды