Siemens CP 1542SP-1, Руководство по эксплуатации

Страница: 92 / 118

Diagnostics and maintenance
6.3 Diagnostics with SNMP
CP 154xSP-1
92
Operating Instructions, 12/2019, C79000-G8976-C426-05
Supported MIB objects in SNMPv3
If SNMPv3 is enabled, the CP returns the contents of the following MIB objects:
● MIB II (acc. to RFC1213)
The CP supports the following groups of MIB objects:
–
System
– Interfaces
The "Interfaces" MIB object provides status information about the CP interfaces.
– IP (IPv4/IPv6)
– ICMP
– TCP
– UDP
– SNMP
The following groups of the standard MIB II are not supported:
–
Adress Translation (AT)
– EGP
– Transmission
● LLDP MIB
Access rights using community names (SNMPv1)
As default setting, the CP uses the following community strings to control the permissions for
access to the SNMP agent:
Table 6- 1 Access rights in the SNMP agent
Type of access Community string
*)
Read access public
Read and write access private
*) Note the use of lowercase letters!
The community strings can be configured when the security functions are enabled.