11
Smart Infrastructure
A6V13605540_en--_b
Smart Infrastructure
2022-10-14
European Union conformity
Contact for regulatory topics: (EU) Siemens AG, Berliner Ring 23, DE-76437 Rastatt
United Kingdom conformity assessed
Contact for regulatory topics: (GB) Siemens plc, Sir William Siemens House, Princess Road,
Manchester, M20 2UR
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
●
Reorient or relocate the receiving antenna.
●
Increase the separation between the equipment and receiver.
●
Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
●
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause
undesired operation
FCC Caution:
Changes or modifications not expressly approved by Siemens Switzerland
Ltd. could void user authority to operate the equipment. United States representative
https://new.siemens.com/us/en/products/buildingtechnologies/home.html
Cellular RF
●
This device contains a cellular RF module with FCC ID: 2AJYU-8PYA004
●
This device contains a cellular RF module with IC: 23761-8PYA005
FCC Caution:
●
This equipment must be installed and operated in accordance with provided instructions
and the antenna(s) used for this transmitter must be installed to provide a separation
distance of at least 20 cm from all persons and must not be collocated or operating in
conjunction with any other antenna or transmitter. End-users and installers must be
provided with antenna installation instructions and transmitter operating conditions for
satisfying RF exposure compliance.
●
Any changes or modifications not expressly approved by the grantee of this device could
void the user's authority to operate the equipment.
●
This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
The cellular antenna delivered by Siemens meets the FCC-IC regulations. If the installer
makes the choice to use another antenna, it must follow the specifications listed below for
the device used to comply with FCC/IC regulations limiting both maximum RF output power
and human exposure to RF radiation.
●
Whip antenna type
●
50 Ohm typical impedance
●
Maximum antenna gain, see table below
