Microwave
en
17
Cookware and ac-
cessories
Information
Metal cookware and
bakeware
Metal can be used with Micro-
Combi.
Note:
Metal must be kept at
least 2 cm from the cooking
compartment walls and the in-
side of the door.
Accessories sup-
plied:
¡
Wire rack
¡
Universal pan
The supplied accessory is suit-
able for MicroCombi. No
sparks are created.
Testing cookware for microwave suitability
If you are unsure whether your cookware is suitable for
use in the microwave, carry out a cookware test.
ATTENTION!
Operating the appliance without food in the cooking
compartment may lead to overloading.
▶
Do not switch on the microwave unless there is food
inside. The only exception to this rule is when per-
forming a short cookware test.
WARNING ‒ Risk of burns!
The accessible parts of the appliance become hot dur-
ing operation.
▶
Never touch these hot parts.
▶
Keep children at a safe distance.
1.
Place the empty cookware in the cooking compart-
ment.
2.
Set the appliance to run for 30 seconds to 1 minute
at maximum power.
3.
Start the operation.
4.
Check the cookware several times:
‒
If the cookware remains cold or warm to the
touch, it is suitable for microwave use.
‒
If the cookware becomes hot or sparks are cre-
ated, stop the cookware test. The cookware is
not microwave-safe.
11.2 Configuring the microwave settings
Notes
¡
Note the correct way to operate the microwave:
–
–
"Preventing material damage", Page 6
–
–
"Cookware and accessories with microwave",
¡
To prevent condensation, when the microwave out-
put is 600 watts (max), the appliance automatically
switches on a heating element. The cooking com-
partment and the accessories become hot. The
cooking result is not affected by this.
You can switch off this drying function in the basic
settings.
WARNING ‒ Risk of burns!
At the highest settings in microwave only mode, the
drying function will automatically switch on an addi-
tional heating element to heat the cooking compart-
ment.
▶
Never touch the inside surfaces of the cooking com-
partment or the heating elements while they are hot.
▶
Keep children at a safe distance.
1.
Press
.
2.
Select the "Microwave" in the operating modes
menu.
3.
Use the rotary selector to set the microwave output
setting.
4.
Press the cooking time.
5.
Use the rotary selector to set the cooking time.
6.
Press
to start the operation.
a
The microwave starts and the cooking time counts
down.
a
Once the cooking time has elapsed, an audible sig-
nal sounds. The time shown in the display is zero.
7.
Once the cooking time has elapsed:
‒
Press
to silence the audible signal manu-
ally.
‒
If necessary, set the microwave output setting
and cooking time again.
‒
When the food is ready, press
to switch the
appliance off.
8.
If you have switched off the drying function for the
microwave in the basic settings, dry the cooking
compartment.
Note:
If you open the appliance door during operation,
the operation stops. When you close the appliance
door, you must press
to continue. If you have
changed the basic setting, make sure that the mi-
crowave does not resume operation without food in-
side.
Changing the microwave output setting
If you change the microwave output setting, the cook-
ing time is reset.
1.
Press
to pause operation.
2.
Press the microwave output setting.
3.
Use the rotary selector to set the microwave output
setting.
4.
Press
to resume operation.
Changing the cooking time
After the microwave starts operating, you can change
the cooking time directly.
▶
Use the rotary selector to change the cooking time.
a
The change is applied immediately.
11.3 Microwave combination
To reduce the cooking time, you can use certain types
of heating in combination with the microwave.
Possible types of heating include:
¡
4D hot air
¡
Top/bottom heating
