Siemens CD634GB 2W Series, Инструкция по эксплуатации

Страница: 20 / 32

en
Cleaning
20
Cleaning sponge
The enclosed cleaning sponge is very absorbent. Use
the cleaning sponge only for cleaning the cooking
compartment and for removing residual water from the
evaporator dish.
Wash the cleaning sponge thoroughly before using for
the first time. You can wash the cleaning sponge in the
washing machine (hot wash).
Microfibre cloth
The honeycomb microfibre cloth is particularly suitable
for cleaning sensitive surfaces such as glass, glass
ceramic, stainless steel or aluminium (product
no. 460 770, also available from our online eShop). It
removes liquid and greasy deposits in one go.
Descale
The appliance must be descaled regularly in order for it
to continue operating correctly.
There are several steps in the descaling programme. All
steps must be completed in full. Only after this is the
appliance ready for use again.
Note:
If you touch the
k
button during the descaling
programme, the process is interrupted and the
appliance switches off. Once the appliance has been
switched back on again, it must first be rinsed twice in
order to remove any remaining descaling solution from
the appliance. The appliance is locked for other
applications until the second rinsing cycle is complete.
■
Descale (approx. 30 minutes), then empty the
evaporator dish and refill the water tank
■
First rinsing cycle (20 seconds), then empty the
evaporator dish
■
Second rinsing cycle (20 seconds), then remove the
remaining water
The frequency with which the appliance must be
descaled depends on the hardness of the water used.
When only five more steam-assisted operations are
possible, or fewer, the appliance reminds you to
descale it with a message on the display. The number
of remaining operations is displayed after the appliance
is switched on. You can therefore prepare for the
descaling in good time.
Starting
Caution!
■
Risk of damage to the appliance: Only use liquid
descalers recommended by us for the descaling
programme. The time the product needs to work
during descaling depends on the type of descaler
used. Other descalers may damage the appliance.
Descaler order no. 311 680
■
Descaling solution: Do not allow any descaling
solution or descaler to come into contact with the
control panel or other surfaces on the appliance.
This damages the surfaces. If this does happen,
remove the descaling solution immediately with
water.
1.
Mix 300 ml water with 60 ml liquid descaler to make
a descaling solution.
2.
Remove the water tank and fill it with descaling
solution.
3.
Once the water tank has been filled with descaling
solution, push it back in again fully.
4.
Close the appliance door.
5.
Press the
k
button.
6.
Press the
j
button.
The operating modes menu opens.
7.
Touch the right-hand arrow repeatedly until
"Descale" appears.
8.
Press the
u
button to start descaling.
You can see the remaining time counting down in
the status bar. A signal sounds once the remaining
time has fully elapsed.
First rinsing cycle
1.
Press the
u
button.
The appliance rinses. The first rinsing cycle ends
after around 20 seconds.
2.
Open the appliance door.
3.
Thoroughly rinse out the cleaning sponge with water.
4.
Remove the remaining water in the evaporator dish
using the cleaning sponge.
5.
Proceed with the second rinsing cycle.
Second rinsing cycle
1.
Remove the water tank, rinse thoroughly, fill with
water and reinsert.
2.
Close the appliance door.
3.
Press the
u
button.
The appliance rinses. The second rinsing cycle ends
after around 20 seconds.
4.
Remove the remaining water in the evaporator dish
using the cleaning sponge.
5.
Wipe out the cooking compartment using the
cleaning sponge and then dry with a soft cloth.
6.
Switch off the appliance.
Descaling is complete and the appliance is ready for
use again.
Door seal Hot soapy water
Accessories Soak in hot soapy water. Clean with a brush or washing-up sponge or in the dishwasher. If the rails
are discoloured by starchy foods (e.g. rice), clean them with a vinegar solution.