Siemens CD634GB 2W Series, Инструкция по эксплуатации

Страница: 11 / 32

Before using for the first time
en
11
K
Before using for the first
time
Before us ing for t he first time
Before you can use your new appliance, you must
make some settings. You must also clean the cooking
compartment and accessories.
Initial use
Notes
■
You can change these settings at any time in the
basic settings.
~
"Basic settings" on page 18
■
After connecting the appliance to the power or
following a power cut, the settings for initial use are
shown in the display.
Setting the language
1.
Use the rotary selector to select the required
language.
2.
Touch the
¿
arrow.
The next setting appears.
Setting the time
1.
Use the rotary selector to set the current time.
2.
Touch the
¿
arrow.
Setting the date
1.
Use the rotary selector to set the current day, month
and year.
2.
Touch the
¿
field.
The next setting appears.
Setting the water hardness
1.
Turn the rotary selector to the right until your water
hardness range appears.
2.
Touch the arrow
¿
to confirm.
A note appears in the display confirming that the
initial use has been completed.
Calibrating the appliance and cleaning the
cooking compartment
Before using the appliance to prepare food for the first
time, you must calibrate the appliance and clean the
cooking compartment.
Calibrating the appliance and cleaning the cooking
compartment
Preparing calibration
1.
Remove the accessories from the cooking
compartment.
2.
Remove leftover packaging, such as polystyrene
pellets, from the cooking compartment.
3.
Before calibrating the appliance, wipe the smooth
surfaces in the cooking compartment with a soft, wet
cloth.
Calibrating the appliance and cleaning the cooking
compartment
Notes
■
The calibration can only be started once the cooking
compartment is cold (room temperature).
■
Do not open the appliance door during calibration.
Doing this will interrupt calibration.
1.
Press the
u
button to switch on the appliance.
2.
Fill the water tank.
3.
Set the specified type of heating, temperature and
cooking time, then start the appliance operation.
4.
Press the
u
button to switch off the appliance.
5.
Wait until the cooking compartment has cooled
down.
6.
Clean the smooth surfaces with soapy water and a
dish cloth.
7.
Empty the water tank and dry the cooking
compartment.
Notes
■
So that the appliance adapts to a new installation
location after moving house, reset the appliance to
the factory settings. Repeat the initial use settings
and the calibration.
■
The appliance saves the calibration settings, even in
the event of a power cut or disconnection from the
mains. Recalibration is not necessary.
Cleaning the accessories
Clean the accessories thoroughly using soapy water
and a dish cloth or soft brush.
Settings
Type of heating Steam
é
Temperature 100 °C
Duration 20 minutes