Siemens CD634GB.1, Инструкция по эксплуатации

Страница: 11 / 32

Operating the appliance
en
11
1.
Press the On/Off button to switch on the appliance.
2.
Fill the water tank.
~
"Filling the water tank"
on page 12
3.
Set the specified heating type, temperature and
cooking time, then start the appliance operation.
4.
Press the On/Off button to switch off the appliance.
5.
Wait until the cooking compartment has cooled
down.
6.
Clean the smooth surfaces with soapy water and a
dish cloth.
7.
Empty the water tank and dry the cooking
compartment.
~
"After each use" on page 13
Notes
■
So that the appliance adapts to a new installation
location after moving house, reset the appliance to
the factory settings. Repeat the initial use settings
and the calibration.
■
The appliance saves the calibration settings, even in
the event of a power cut or disconnection from the
mains. Recalibration is not necessary.
Cleaning the accessories
Clean the accessories thoroughly using soapy water
and a dish cloth or soft brush.
1
Operating the appliance
Operating the appl iance
You have already learnt about the controls and how
they work. Now we will explain how to set your
appliance. You will learn about what happens when you
switch the appliance on and off, and how to select the
operating mode.
:
Warning – Risk of scalding!
When you open the appliance door, hot steam can
escape. Steam may not be visible, depending on its
temperature. When opening, do not stand too close to
the appliance. Open the appliance door carefully. Keep
children away.
:
Warning – Risk of scalding!
The water in the evaporator dish is still hot even after
the appliance has been switched off. Do not empty the
evaporator dish immediately after switching off the
appliance. Allow the appliance to cool down before
cleaning it.
Switching the appliance on and off
Before you are able to set the appliance, you must
switch it on.
Exception: The childproof lock and the timer can be set
when the appliance is switched off.
Displays or information, e.g the residual heat indicator
in the cooking compartment, remain visible in the
display after the appliance has been switched off.
Switch off your appliance when you do not need to use
it. If no settings are applied for a long time, the
appliance switches itself off automatically.
Switching the appliance on
Use the On/Off button to switch the appliance on.
The on/off symbol above the button is illuminated in
blue.
The Siemens logo appears in the display, and then a
type of heating and a temperature.
Note:
You can specify which operating modes should
appear after the appliance is switched on in the basic
settings.
Switching off the appliance
Use the On/Off button to switch off the appliance.
The lighting above the button goes out.
A set function is cancelled.
The time appears in the display.
Note:
You can set whether or not the time should be
displayed when the appliance is switched off in the
basic settings.
Settings
Heating type Steam
é
Temperature 100 °C
Cooking time 20 minutes