Siemens CCDA1445, Руководство по установке, Страница: 58 / 342

Configuration
58
Building Technologies
048_CCDA1445_A6V10257135_V1.0_en
Fire Safety & Security Products 20.08.2009
9. To accept the selection press <O> (focus near).
10. To select the Mask color BLACK or GREY move the joystick left or right.
11. To accept the selection press <O> (focus near).
Ö
The privacy zone setup is finished.
10.3.1.5 ALARM ACTIONS
INPUT NO
1
2
3
4
MOTION
ACTION
N
N
N
N
N
OUT
N
N
N
N
N
Option Option settings
INPUT Number of alarm input or motion
ACTION Alarm action point (1-4).
OUT Y (Yes) or N (No) for alarm output activating or not
4 alarm input and 1 alarm output connectors are provided on the dome camera
base. Each alarm input can be linked to a function:
z
B/W: the camera switches to B/W mode.
z
PARK: the camera moves to the home position (preset 1).
z
RANDOM-, FRAME- and AUTO-SCAN: the camera performs the selected scan
function.
z
PATTERN 1-4: the camera performs the selected pattern tour.
z
AUTO PATROL: the camera repeats a pattern of up to 64 presets.
In order to execute a function as an alarm action, the function must have been
previously configured.
The function that was activated last is always carried out, irrespective of the
current status of the alarm inputs. Exception: The function B/W (switchover from
colour to BW) is carried out independent of the other alarm inputs.
The alarm duration time can be set by change STOP TIME of P1 from 1 sec to
120 sec. See page [
J
59]
To set the alarm actions:
1.
Make sure to set the preset points (total 64 points and BW MODE, RANDOM,
FRAME, AUTO, PATTERN 1-4, PATROL 1-4) before accessing this menu.
2. Access the Alarm Actions menu.
3. To set every alarm (1-4) action point.