Siemens CCDA1445, Руководство по установке, Страница: 18 / 342

Installation
18
Building Technologies
048_CCDA1445_A6V10257135_V1.0_en
Fire Safety & Security Products 20.08.2009
6. Two support arms are fixed to the inside of the housing to secure the housing
to the ceiling (B).
7. Pass the video cable, power cable, and the communication cable inside the
housing from the hole A on the base of the housing. Punch a hole in the centre
of the housing and allow the cables to pass through.
8. Extend the support arms so that they hold onto the ceiling securely (B).
9. Tighten the locking screw from the bottom until the top housing is fixed to the
ceiling securely (B).
10. Use a support wire for safety.
11. The hole B that fixes a support wire is on the side. Note: The support wire is
not attached.
12. Attach the video cable (included with the dome housing) to the video connector
on the dome base. Note: Do not connect the coaxial cable directly to the dome
camera. There is a possibility of damaging the connector. Be sure to use the
cable included in the dome accessories.
13. Connect the communication cables directly to the appropriate terminals on the
dome base.
14. Tighten the fixing screw to fix the speed dome base into the housing.
15. Connect the support wire to the hook of the dome base (A).
16. To lock the dome drive to the dome base, line up the notch with the label and
turn to the right with both hands (A).
17. To lock the dome cover, insert the support wire and turn to the right with both
hands until locked into position (C).
Ö
The installation is completed.