Siemens BACnet Скачать руководство пользователя страница 25

Страница: 25 / 28

Glossary

Siemens Industry, Inc.

Owner's Manual

125-5093

Building Technologies

2015-10-14

HMI

Human Machine Interface. Terminal and its interface program that allows you to

communicate with a field panel or equipment controller.

Occupancy sensor

A control device that detects presence of people in a space by using infrared or

ultrasonic technology. Occupancy sensors are used to save energy by controlling

lighting and temperature and, along with CO2 sensors, to provide control input of

demand control ventilation (DCV) algorithms.

override switch

Button on a room temperature sensor that an occupant can press to change the status

of a room from unoccupied to occupied (or from night to day) for a predetermined time.

pressure dependent

Variable Air Volume (VAV) room temperature control system in which the temperature

drives a damper such that the air volume delivered to the space at any damper position

is dependent on the duct static pressure.

pressure independent

Variable Air Volume (VAV) room temperature control system in which the temperature

drives an airflow setpoint such that the air volume delivered to the space is

independent of variations in the duct static pressure.

PID

Proportional, Integral, Derivative.

RTS

Room Temperature Sensor.

setpoint

Data point that stores a value such as a temperature setting. In contrast, points that

monitor inputs, such as temperature, report actual values.

SI units

Systeme International d'Unites. The international metric system.

slave mode

Default application that displays when power is first applied to an equipment controller.

No control action is initiated in the slave mode. Input and output points in the slave

application can be monitored or controlled by a field panel (or by PPCL in a BACnet

PTEC controller).

stand-alone control

Type of control offered by a controller that is providing independent DDC control to a

space.

Terminal Equipment Controller

Siemens Industry, Inc. product family of equipment controllers that house the

applications software used to control terminal units, such as heat pumps, VAV terminal

boxes, fan coil units, unit ventilators, and so on.

Содержание BACnet





























Результаты поиска

Содержание BACnet

Отзывы:

Похожие инструкции для BACnet

Бренды по названию

Популярные бренды

Siemens BACnet, Руководство пользователя

Результаты поиска

Содержание BACnet

Отзывы:

Похожие инструкции для BACnet

Бренды по названию

Популярные бренды