Siemens BACnet, Руководство пользователя

Страница: 21 / 28

Chapter 4 – Basic Service and Maintenance
Basic Service Information
21
Siemens Industry, Inc. Owner's Manual 125-5093
Building Technologies 2015-10-14
Chapter 4 – Basic Service and Maintenance
This chapter describes corrective measures you can take should you encounter a
problem when using a BACnet Fume Hood Controller.
You are not required to do any controller troubleshooting. You may want to contact
your local Siemens Industry representative if a problem occurs or you have any
questions about the controller.
NOTE:
When troubleshooting, record the problem and what actions were performed
immediately before the problem occurred. Being able to describe the problem in detail
is important should you need assistance from your local Siemens Industry
representative.
Basic Service Information
Always remove power to the BACnet Fume Hood Controller when installing or
replacing it. Since the controller does not have a power switch, the recommended
method of removing power to a locally powered controller is to turn OFF the power to
the 24 Vac transformer. The recommended method of removing power to a controller
on a power cable (even to service a single controller) is to turn OFF the power at the
transformer.
NOTE:
When removing power to a controller to perform maintenance or service, make sure
that the person in charge of the facility is aware of this and that appropriate steps are
taken to keep the building in control.
Never remove the cover from the BACnet Fume Hood Controller. There are no
serviceable parts inside. If a problem is found with this device, contact your local
Siemens Industry representative for replacement. An anti-static wrist strap is
recommended when installing or replacing controllers.
Preventive Maintenance
Most controller components are designed so that, under normal circumstances, they
do not require preventive maintenance. Periodic inspections, voltage checks, and point
checks are normally not required. The rugged design makes most preventive
maintenance unnecessary. However, devices that are exposed to dusty or dirty
environments may require periodic cleaning to function properly.