Siemens ARCADIS Orbic, Установка и запуск, Страница: 15 / 46

Siemens AG SPR2-320.814.02.01.02 ARCADIS Orbic
01.05 CS SD 24
3D Reconstruction Upgrade Part 1 15
Page 15 of 46
Medical Solutions
4-
33D Reconstruction Upgrade Part 1
C-arm
0
•
Move the C-arm into the 0º position (Fig. 3 / p. 15) .
•
Apply marks at 20 mm intervals to determine the lateral limit for the cam (Fig. 4 / p. 16) .
•
Position the cam. Ensure that the cam is flush with the top and mark the holes with the
cam laterally at the 20 mm mark
(Fig. 5 / p. 16) .
•
Punch-mark the holes.
•
Ensure that shavings or dust do not drop into the C-arm.
•
Use a 3.2-mm bit for drilling. Continue until you have have drilled through the wall. En-
sure that you are not drilling beyond the wall
(Fig. 6 / p. 17) .
•
Counterbore the holes.
•
Cut the threads using an M4 thread tap (e.g. use a tap wrench) (Fig. 7 / p. 17) .
•
Attach the cam using 2 countersunk screws M 4 x 8 (Fig. 8 / p. 18) .
•
Repeat these steps on the other side of the C-arm.
Fig. 3: C-arm _ starting position