background image

6 / 60

Siemens

Actuators SAS.., SAT.. for valves

CE1P4041en

Smart Infrastructure

About

 this documentation

2019-04-09

1.4 

Before you start

1.4.1 

Trademarks

The table below lists the third-party trademarks used in this document and their
legal owners. The use of trademarks is subject to international and domestic
provisions of the law.

Trademarks

Legal owner

Acvatix

TM

Siemens Switzerland Ltd

All product names listed in the table are registered (®) or not registered (™)
trademarks of the owner listed in the table. We forgo the labeling (e.g. using the
symbols ® and ™) of trademarks for the purposes of legibility based on the
reference in this section.

1.4.2 

Copyright

This document may be duplicated and distributed only with the express permission
of Siemens, and may be passed on only to authorized persons or companies with
the required technical knowledge.

1.4.3 

Quality assurance

These documents were prepared with great care.

·

  The contents of all documents are checked at regular intervals

·

  All necessary corrections are included in subsequent versions

·

  Anpassungen bzw. Documents are automatically amended as a consequence of

modifications and corrections to the products described

Please make sure that you are aware of the latest document revision date.
If you find lack of clarity while using this document, or if you have any criticisms or
suggestions, please contact the product manager in your nearest branch office.
The addresses of the Siemens regional companies are available at

www.siemens.com/acvatix

.

Содержание Acvatix SAS Series






























































Отзывы: