Siemens ACVATIX G B111.9E/KN Series Скачать руководство пользователя страница 4

Страница: 4 / 12

4 / 12
Siemens

A6V10725318_en--_e

Building Technologies

2018-06-05

Controllers and room units

Product no.

Ordering no.

Documentation

Room thermostat KNX

RDG160KN

S55770-T297

A6V10629627

(N3191)

Flush-mount room sensor KNX

AQR2532NNW with
AQR2570NF or
AQR2576NF

S55720-S136
S55720-S203
S55720-S207

A6V10389050

(N1411)

Room control unit

UP227/11

5WG1227-2AB11

A6V10387579

Software versions

G..B111.9E/KN series B are designed for using ETS device profile v2.x. ETS device profile
v1.x is supported for backward compatibility reasons.

Series information

Series A

Series B

Production period

12/2015 – 01/2017

01/2017

ETS device profile v1.x

supported

ETS device profile v2.x

not supported

supported

Note

: The Software-Tools ACS931 / 941 and the handheld tool AST20 are not supported by

the GDB111.9E/KN and GLB111.9E/KN.

Product documentation

Title

Topic

Document ID

Communication via the KNX bus

A6V10075840 (P3127)

Mounting instruction

Mounting instructions rotary actuator

A6V10523083 (M4657)
or A6V10636144

Datasheet 6-port control ball valve Technical information on 6-port control ball valves

VWG41..

A6V10564480

Datasheet 2-port and 3-port control
ball valves, PN 40, with internally
threaded connection

Technical information on 2-port and 3-port control
ball valves VAI61… and VBI61..

N4211

Datasheet 2-port and 3-port control
ball valves, PN 40, with externally
threaded connection

Technical information on 2-port and 3-port control
ball valves VAG61… and VBG61..

N4212

Datasheet 2-port shutoff valves and
3-port changeover ball valves, PN
40, with internally threaded
connection

Technical information on 2-port shutoff and 3-port
changeover ball valves VAI60… and VBI60..

N4213

Datasheet 2-port shutoff valves and
3-port changeover ball valves, PN
40, with externally threaded
connection

Technical information on 2-port shutoff and 3-port
changeover ball valves VAG60… and VBG60..

N4114

How to obtain documentation and product-related software

Related documents such as environmental declarations, CE declarations, etc., can be down-
loaded at the following Internet address:

http://siemens.com/bt/download

The ETS device profile can be downloaded at the following Internet address:

http://siemens.com/hvac-td

Содержание ACVATIX G B111.9E/KN Series













Результаты поиска

Содержание ACVATIX G B111.9E/KN Series

Отзывы:

Похожие инструкции для ACVATIX G B111.9E/KN Series

Бренды по названию

Популярные бренды

Siemens ACVATIX G B111.9E/KN Series, Руководство пользователя

Результаты поиска

Содержание ACVATIX G B111.9E/KN Series

Отзывы:

Похожие инструкции для ACVATIX G B111.9E/KN Series

Бренды по названию

Популярные бренды