background image

8 / 12
Siemens

A6V10725318_en--_e

Building Technologies

2018-06-05

Notes

Safety

Caution

National safety regulations

Failure to comply with national safety regulations may result in personal injury and
property damage.

Observe national provisions and comply with the appropriate safety regulations.

Mounting

Mounting positions

IP54 in the following mounting positions

Maintenance

The rotary actuators are maintenance-free.
Disconnect the electrical connections from the terminals if you want to work at the device.

Disposal

The device is considered electrical and electronic equipment for disposal in

terms of the applicable European Directive and may not be disposed of as do-
mestic garbage.

  Dispose of the device through channels provided for this purpose.

  Comply with all local and currently applicable laws and regulations.

Warranty

Technical data on specific applications are valid only together with Siemens products listed
under "Equipment combinations". Siemens rejects any and all warranties in the event that
third-party products are used.

Note

When using the actuators in connection with components of other manufacturers,
correct functioning must be ensured by the user, and Siemens will assume no
responsibility.

Содержание ACVATIX G B111.9E/KN Series













Отзывы: