manualshive.com logo in svg

Siemens 8DA10, Инструкция по установке и эксплуатации, Страница: 161 / 214

Поделиться
Скачать
Siemens 8DA10 Скачать руководство пользователя страница 161

 861-9601.9 • INSTALLATION AND OPERATING INSTRUCTIONS • 8DA10 • Revision 11

161/214

Operation

                                                                                                                                                         

Earthing the feeder

WARNING

Hazardous voltage
Can cause death or serious injury. 

In panels with circuit-breaker, the earthing process is not completed as long as the circuit-
breaker remains open.
➭ Switch the three-position disconnector to READY-TO-EARTH position.
➭ Close the circuit-breaker.

CAUTION

Internal arcing and explosion hazard
Operating the three-position disconnector under load can cause injury or property 
damage.

A mechanical interlock prevents, as standard, the three-position disconnector from being 
operated under load. The switchgear can optionally be equipped in accordance with a 
customer-specific interlocking and control scheme.
➭ If the customer-specific interlocking and control scheme requires that the panel be 

provided without electromechanical or mechanical interlocks, the three-position 
disconnector can be operated under load.

➭ Do NOT operate the three-position disconnector under load.

Содержание 8DA10























































































































































































































Отзывы:

Нет отзывов