manualshive.com logo in svg

Siemens 8DA10, Инструкция по установке и эксплуатации, Страница: 106 / 214

Поделиться
Скачать
Siemens 8DA10 Скачать руководство пользователя страница 106

 Installation

106/214

Revision 11 • INSTALLATION AND OPERATING INSTRUCTIONS • 8DA10 • 861-9601.9 

 

                                                                                                                                                                            

24

Installing the voltage transformers

DANGER

Hazardous voltage.
Will cause death, serious injury and property damage.

Always observe the Five Safety Rules:
➭ Isolate.
➭ Secure against reclosing.
➭ Verify safe isolation from supply.
➭ Earth and short-circuit.
➭ Cover or barrier adjacent live parts.

DANGER

Hazardous voltage
Can cause death, injury or considerable property damage.

The metal coating on the outside of voltage transformers is connected to earth potential. 
If the metal coating is damaged, the voltage transformer is not safe-to-touch anymore.
➭ Do not damage the metal coating of voltage transformers.

WARNING

Internal arcing and explosion hazard
If a voltage transformer is short-circuited, there will be a considerable current flow. 
This considerable current flow implies the risk of internal arcing, and the voltage 
transformer can explode and produce a fire. Death, serious injury and considerable 
property damage can be the consequence.

➭ Never short-circuit voltage transformers on the secondary side.
➭ Check the voltage transformer circuits from the voltage transformer to the secondary fuse 

or short-circuit protective device for short circuits.

➭ Check correct operation of the existing protective devices in the voltage transformer 

secondary circuit.

Содержание 8DA10























































































































































































































Отзывы:

Нет отзывов