881-4027.9 * INSTALLATION AND OPERATING INSTRUCTIONS 8BT2 * Revision 04
23
3. DISPATCH AND STORAGE
3.1. Delivery condition
8BT2 cubicles are factory assembled and the withdrawable parts are in the service position and the
doors are closed during the dispatch.
They are checked at the works for completeness in terms of the order and simultaneously subjected to
routine test to IEC publication 62271-200, and are therefore tested for correct structure and function.
The busbars are not assembled. The busbar material, fasteners and accessories are packed
separately.
3.2. Packing and transportation
Packing
Depending on the kind of transport and country of destination, the transport units can be packed as
follows:
• On pallets, covered with PE protective foil
• In a seaworthy crate (switchgear is sealed with desiccant bags in PE protective foil,
maximum storage period: 6 months)
• Other packing in special cases.
NOTE!
The packing materials of 8BT2 switchgear can be disposed of as classified materials.
Please observe the local regulations for disposal and environmental protection.
Transport unit
The switchgear is delivered in transport units. These consist of individual switchpanels
without fitted busbars.
Accessories are packed separately and included with the switchgear.
Transport weights,
dimensions with packing
Panel type
Domestic packing dimensions (mm)
Transport weights (kg)
width
depth
height
maximum
A Wall standing
1250
2600
2620
1250
A Free standing
1250
2850
2620
1450
Seaworthy packing dimensions (mm)
Transport weights (kg)
width
depth
height
maximum
A Wall standing
1470
2720
2670
1900
A Free standing
1470
2970
2670
2100
3.3. Intermediate storage
DANGER!
Risk of injury and damage to the storage place and the stored goods if the storage
space is overloaded.
Observe the load-bearing capacity of the floor.
Do not stack the transport units.
Do not overload lighter components by stacking.
ATTENTION!
Fire risk. The transport unit is packed in flammable materials.
No smoking.
Keep fire extinguishers in a weatherproof place.
Mark the location of the fire extinguisher.
Содержание 8BT2
Страница 6: ...6 Revision 04 INSTALLATION AND OPERATING INSTRUCTIONS 8BT2 881 4027 9 ...
Страница 42: ...42 Revision 04 INSTALLATION AND OPERATING INSTRUCTIONS 8BT2 881 4027 9 Fig30 1250A Assembly of Coupling bars ...
Страница 43: ...881 4027 9 INSTALLATION AND OPERATING INSTRUCTIONS 8BT2 Revision 04 43 Fig31 2000A Assembly of Coupling bars ...