Siemens 7XV5655-0BA00, Инструкции по применению

Страница: 3 / 53

English 7XV5655-0BA00
3 / 53
C53000-G1176-C174-3
General Information
This manual contains the information that is necessary for proper and safe operation of the
products described. This manual is intended for technically qualified personnel having
received special training in, or having special knowledge of protection, measurement and
control engineering, hereinafter called automation engineering. The knowledge and correct
application of the warnings and instructions contained in this manual are prerequisites to
safe installation and commissioning of this product, as well as to proper and safe operation
and maintenance. Only qualified personnel as defined overleaf have the special knowledge
required for correct interpretation of the general safety information and warnings given in
this manual, and for their application to the task in hand. This manual is included in the
scope of delivery. For reasons of clarity, however, it does not purport to contain every detail
of all versions of the product described, nor can it deal with all possible cases of erection,
operation or maintenance. If further information is desired or if special problems arise that
are not treated adequately in this document, it is possible to obtain additional details from
your local Siemens office or from the addresses stated on the back of this manual.
We should also like to point out that the contents of this product documentation are not part
of any previous or existing agreement or legal relationship, nor are they apt to modify such
an agreement or relationship. All obligations incurred by Siemens result from the purchase
contract, which also contains the complete and solely applicable warranty conditions.
Contractual warranty conditions are neither extended nor restricted by the contents of this
document.
Disclaimer of Liability
We have checked the contents of this document and
every effort has been made to ensure that the
descriptions of both the hardware and software are as
accurate as possible. However, since deviations cannot
be ruled out entirely, we do not accept liability for
complete conformity or for any errors or omissions.
The information given in this document is reviewed
regularly and any necessary corrections will be included
in subsequent editions. We are grateful for any
improvements that you care to suggest.
Subject to technical modifications without notice.
Release 3.00.00
Copyright
Copyright © Siemens AG 2008. All rights reserved.
The reproduction, transmission or use of this document or
its contents is not permitted without express written
authority.
Offenders will be liable for damages. All rights, including
rights created by patent grant or registration of a utility
model or design, are reserved.
Registered Trademarks
SIPROTEC, SINAUT, SICAM and DIGSI® are registered
trademarks of Siemens AG. Other designations in this
manual might be trademarks whose use by third parties for
their own purposes would infringe the rights of the owner.