Siemens 7MC3052-1AB63 Скачать руководство пользователя страница 42

Страница: 42 / 64

Operating instructions

15.2 Error indications

Overload output

The corresponding LED OUT 1 will flash at

4 Hz. The display shows "

SC1

" at 2 Hz.

Overtemperature

Display

alternately shows overtempera-

ture and measurement reading at = 0.5 Hz.

The corresponding LED flashes at 4 Hz when

the output is switched off.

Incorrect connection of

supply voltage

LED OUT 1 flashes at 2 Hz.

Supply voltage

≤ approx. 16 V

LED, display, switching output and analogue

output are deactivated.(When voltage ≥ 16 V

the device switches on and the switching

outputs are activated).

Temperature below lower

threshold

The display shows

Temperature above upper

threshold

The display shows

16 Theory of Non-Contact Temperature Measurements

All materials radiate thermal energy in all states of aggregation above absolute

zero. This radiation is mainly caused by atomic or molecular oscillations.
This temperature radiation is only a limited sector within the total electromagnetic

radiation spectrum. It extends from the visible range starting at wavelengths of

approx. 0.5 μm to the infrared range with wavelenghs of more than 40 μm. Radia

tion pyrometers detect infrared radiation for non-contact temperature measurement.

16.1 Advantages of Non-Contact Temperature Measurement

• Non-contact temperature detection means cost-effective temperature measure-

ment because this technique only requires a single in-vestment in an instrument

without any follow-up costs for consumables such as thermocouples.

• This method enables temperature detection of moving objects - quick temper-

ature measurements within milliseconds - for example at automatic welding

processes.

Содержание 7MC3052-1AB63

































































Результаты поиска

Содержание 7MC3052-1AB63

Отзывы:

Siemens 7MC3052-1AB63, Руководство по эксплуатации, Страница: 42 / 64

Результаты поиска

Содержание 7MC3052-1AB63

Отзывы: