Siemens 7MC3052-1AB63 Скачать руководство пользователя страница 35 | Manualshive

Страница: 35 / 64

Siemens 7MC3052-1AB63 Скачать руководство пользователя страница 35

29

Operating instructions

13.1 Safety instructions and precautions

Laser Radiation Hazard: Laser radiation can be harmful to eye!

The laser pointer operates with a class 2 red light laser. Direct prolonged viewing

of a laser beam can injure the retina. There-fore, the following safety precautions

must be strictly observed, otherwise the laser may not be operated!
• Only use the laser to align and focus the pyrometer. Deactive the laser

immediately afterwards.

•  Never look directly into the laser beam path.
•  Do not leave the instrument unattended when the laser is activated.
•  Do not point the laser beam at any person.
•  During pyrometer installation and alignment, make sure to avoid the possibility

of laser light reflections caused by reflective surfaces.

• All currently valid laser safety standards must be observed.

Laser Power

The laser operates at a wavelength of 630 - 670 nm (visible red light). The emitted

power of the laser beam at the lens opening is max. 1.0 mW. Under normal

operating conditions, the emitted radiation does not present a danger to human

skin. This laser product is classified according to laser class 2, IEC 60825-1.

Laser Warning Label

The black and yellow laser warning label is affixed on the laser pointer.

«
...
33
34
35
36
37
...
»

Содержание 7MC3052-1AB63

































































Отзывы:

Нет отзывов