Siemens 7MC3040-..., Руководство по эксплуатации, Страница: 52 / 116

s
Operating manual PA
44
To set the pyrometer to the terminal mode, simultaneously hold down the
Ctrl key and press the E key twice in rapid succession.
Direct commands have an assigned key. Example: E for emissivity (epsi-
lon). Submenu settings are shown in brackets. Example:
[LAMBDA 1]
12.1 Serial Data Transmission of Temperature Data
Transmission parameters for the serial interface:
57600 Baud / 8 data bits / odd parity / 1 stop bit / no handshake
Temperature format (one cycle):
Byte Negative Temperature Positive Temperature Temperature falls below
measuring range Temperature exceeds
measuring range
1 Minus symbol "-" Space Space Space
2 Digit 1000 Digit 1000 Minus symbol "-" Minus symbol "-"
3 Digit 100 Digit 100 "U" "O"
4 Digit 10 Digit 10 "N" "V"
5 Digit 1 Digit 1 "D" "E"
6 Decimal point "." Decimal point "." "E" "R"
7 Decimal place Decimal place "R" Space
8 Space Space Space Space
9 Unit "C" or "F" Unit "C" or "F" Minus symbol "-" Minus symbol "-"
10 Space Space Space Space
11 Carriage Return Carriage Return Carriage Return Carriage Return

Please note:
Main Menu
Submenu 1
Submenu 2
Execute the
command
Execute the
command
Execute the
command
press
[RETURN]
or [ESC]
press
[RETURN]
or [ESC]
press
[RETURN]
or [ESC]
Select [KEY]
Select [KEY]
Press []
Backspace
Backspace
Enter
Enter
Enter
[ESC]
[ESC]
All symbols are ASCII coded; preceding zeros will be
included in the transmission