Siemens 7MC3040-... Скачать руководство пользователя страница 106 | Manualshive

Страница: 106 / 116

Siemens 7MC3040-... Скачать руководство пользователя страница 106

s

Operating manual PA

98

34

Shipping, Packaging and Disposal

34.1 Inspecting your shipment

Unpack  and  inspect  the  entire  shipment  immediately  upon  receipt  to
make sure it is complete and undamaged.

If  the  container/package  shows  visible  signs  of  damage,  please  refuse
the shipment. If this is not possible, accept the shipment on the condition
that  the  freight  carrier’s  delivery  record  is  noted  with  the  extent  of  the
damage in order to file a claim.

Should you discover a concealed loss or damage, report it to  SIEMENS
and  to  the  freight  carrier  immediately.  If  the  period  for  filing  claims  has
expired, you will no longer be able to make any claims for compensation
of damage or loss.

34.2 Packaging

The  packages  used  by  SIEMENS  are  made  of  carefully  selected,  envi-
ronmentally  compatible  materials  and  are  thus  recyclable.  We  suggest
you  retain  the  packaging  for  possible  future  use;  otherwise  please  en-
sure that they are disposed of in an ecologically sound manner.

34.3 Disposal of used apparatus

Used  electrical  and  electronic equipment  often contain  valuable compo-
nents.  The  owner/user  may  either  return  such  an  instrument  to  the
manufacturer  for  disposal,  or  he  must  dispose  of  it  himself  in  a  profes-
sional and nonpolluting manner.

SIEMENS  will  not  be  held  accountable  for  any  inappropriate  disposal
carried out by the user/owner of SIEMENS instruments.

«
...
104
105
106
107
108
...
»

Содержание 7MC3040-...





















































































































Отзывы:

Нет отзывов