manualshive.com logo in svg

Siemens 7MB1420, Инструкция по эксплуатации, Страница: 56 / 74

Поделиться
Скачать
Siemens 7MB1420 Скачать руководство пользователя страница 56

Temperatures, pressures, flow, limits

D

D

This function displays the limit associated with
the limit contact. The measuring ranges are dis-
played (LEDs) in which the limit is active.

Upward violation

Downward violation

9 Display limits

Limit contact No., the associated symbol

for upward/downward violation 

appears to the left of the number

CL

9

Display

If “On” is set, the associated limit relay is trigge-
red when a limit is violated. The LED “lim” flas-
hes.
If “Off” is set, no limit relay is activated.

Factory setting: 0

The selected limit contact can be set to upward
or downward exceeding.
The LED “lim” flashes when the limit contact is
triggered.

Switches with upward exceeding

Switches with downward exceeding

Factory setting: 4

There are 4 limits which can be freely assigned
to the measuring ranges. The input “Effective
measuring ranges” defines the range in which
the limit is triggered. The measuring ranges
must be entered in ascending order.
The setpoint must be entered in the currently
selected unit (ppm C

1

, ppm C

3

, ppm C

6

 or

mg/m

3

) which is output to the right of the dis-

play.
The programmed limit monitoring can be swit-
ched on and off using function 23.

Factory setting for setpoints: 0

** 23 Limit monitoring on/off

** 18 Set limits to upward or downward exceeding

1

Setpoint in current

unit

Limit contact

No.

Effective measuring

ranges

CL

n

9

** 19 Set limit

1

Upward exceeding

Limit contact

No.

Downward
exceeding

0

1

CL

n

8

Display

Off

On

0

2

1

CL

3

A-20

Содержание 7MB1420











































































Отзывы:

Нет отзывов