Siemens 6GK5 615-0AA00-2AA2 Скачать руководство пользователя страница 45

Страница: 45 / 80

SCALANCE S615
Operating Instructions, 10/2022, C79000-G8976-C389-07

Connecting up

5.1

Safety when connecting up

Safety notices

When connecting up the device, keep to the safety notices listed below.

Note
Strain relief for the Ethernet cables

In order to avoid mechanical stress on the Ethernet cables and resulting interruption of the

contact, fasten the cables at a short distance from the connector using a cable guide or

busbar.

Safety notices for operation with a power supply according to NEC Class 2

Operate the device with a power supply according to NEC Class 2. When connecting up the

device, keep to the safety notices listed below.

WARNING

Power supply

The device is designed for operation with a directly connectable safety extra low voltage

(SELV) from a limited power source (LPS).
The power supply therefore needs to meet at least one of the following conditions:
•

Only safety extra low voltage (SELV) with limited power source (LPS) complying with IEC

60950-1 / EN 60950-1 / VDE 0805-1 or IEC 62368-1 / EN 62368-1 / VDE 62368-1 may be

connected to the power supply terminals.

•

The power supply unit for the device must meet NEC Class 2 according to the National

Electrical Code (r) (ANSI / NFPA 70).

If the equipment is connected to a redundant power supply (two separate power supplies),

both must meet these requirements.

WARNING

Insulation of external power supplies

Ext. circuits intended to be connected to this device shall be galv. separated from hazardous

live voltage by reinforced or double insulation.

Содержание 6GK5 615-0AA00-2AA2

















































































Результаты поиска

Содержание 6GK5 615-0AA00-2AA2

Отзывы:

Похожие инструкции для 6GK5 615-0AA00-2AA2

Бренды по названию

Популярные бренды

Siemens 6GK5 615-0AA00-2AA2, Руководство по эксплуатации

Результаты поиска

Содержание 6GK5 615-0AA00-2AA2

Отзывы:

Похожие инструкции для 6GK5 615-0AA00-2AA2

Бренды по названию

Популярные бренды